FM-200/ FE-227
FM-200/
FE-227 systems are the leading agents for replacement of Halon 1301.
Both are colorless, odorless clean agents safe for people and the
environment. These systems
are excellent for use in computer rooms, manufacturing facilities, data
centers and clean rooms, and are safe for Class A and B fire assets.
Back toTop |
 |
Ecaro-25
Ecaro-25 provides an easy, cost effective and environmentally
acceptable solution
to Halon 1301 replacement and can work with your existing Halon pipe
network.
ECARO is safe for people, property and the
environment.
Back toTop |
Inergen Systems
Inergen gas fire suppression is a safe and effective replacement for Halon
1301. It is safe for people,
property and the environment.
Inergen can extinguish a fire in a matter of
seconds by lowering the oxygen content to a level that is sufficient to
sustain human life while elimnating the risk of combustion.
Also this agent does not produce heavy fog that can reduce
visibility.
Back toTop |
Foam Systems
Foam Systems are appropriate to use in facilities transporting, processing
or handling flammable liquids. Foam
systems suppress fire by separating the flammable fuel from oxygen by
flowing over the burning liquid to from a blanket that seals off the
combustible vapors keeping them from access to oxygen.
Back toTop |
 |
Water Mist Systems
Water Mist Systems use a limited amount of water and are a safe,
green solution for fire protection.
These systems suppress fire by cooling, wetting and moving oxygen
away from flames.
Back toTop |
Carbon Dioxide Systems
Carbon Dioxide Systems are available for use in total
flooding or local application type protection systems. CO2
is a naturally occurring colorless, odorless, nonconductive gas that
leaves no residue to clean up. Rapid expansion of this gas extinguishes
fire by reducing oxygen content and fuel vapor while cooling the air and
retarding re-ignition.
Back toTop |
Fire Alarm Systems
A fire alarm system maximizes the safety of your personnel.
These systems have visual and audible alarms to allow for safe
evacuation of your facility.
Back toTop |
Air
Sampling Detection Systems
Air
Sampling Detection Systems are highly sensitive smoke
detectors designed for high value operations that require
rapid response.
Air sampling detection is 1000 times more sensitive than
traditional spot type fire detection.
Back toTop |
 |
Linear Heat Detection Systems
Linear Heat Detection Systems are a cost effective way to detect
fires in your facility and can provide general space protection as well as
detection at the point of risk. Linear
detection is suitable for a wide range of applications since cables are
made with multiple temperature ratings to target your specific hazard.
Back toTop |
Combustible Gas Detection
Combustible gases and vapors pose a great risk for explosion.
CFPI provides a full range of systems from point-type
infrared gas detection to catalytic, electrochemical and toxic gas
detectors.
Back toTop |
|
Portable Fire Extinguishers
Portable Fire Extinguishers are
one of the most effective and cost efficient items of safety equipment.
We can provide the of extinguisher you need depending
on the type of hazard.
Back toTop |
 |
Dry Chemical Systems
Dry chemical extinguishing systems are best suited for high risk or
difficult areas to protect involving flammable liquids/gases, wood and
paper, or electrical equipment. CFPI
provides Total Flooding, Local
Application, and Hose Line dry chemical systems.
Back toTop |
Spark Detection & Suppression
The operation of many production machines can easily produce a spark.
We provide spark detection
systems which detect the smallest spark's infra-red radiation, signaling a
control system to immediately extinguish the spark before a disaster occurs.
Back toTop |
 |
Flame Detection Systems
Flame
detectors are optical fire detection devices that detect infra-red and
ultra violet radiation given off by fire or sparks.
CFPI provides 3 types of flame detectors - Infra-red, Ultra-Violet and Ultra Violet-Infra-Red (UVIR).
Back toTop |
Explosion Protection Systems
Many
of the dust and flammable particles present in chemical process facilities
are explosive. CFPI provides explosion
protection systems that start the extinguishing process in very
early stages of deflagration.
Back toTop |
